CAN - en 
US
RIGOL RSA5032-TG for Rent, Real-Time Spectrum Analyzer, with TG., 3.2GHz
Real-Time Spectrum Analyzer w/ TG. 3.2GHz
Order #: RSA5032-TG-RENT2
Mfg #: RSA5032-TG-RENT2
Call for price
Call for price
RIGOL RSA5032-TG for Rent, Real-Time Spectrum Analyzer, with TG., 3.2GHz
Real-Time Spectrum Analyzer w/ TG. 3.2GHz
Order #: RSA5032-TG-RENT2
Mfg #: RSA5032-TG-RENT2
Call for price
Call for price
Product Highlights
The combination of outstanding swept spectrum performance and 40MHz real-time Bandwidth with category leading 7.45us POI will make the RSA5000 a great choice for those in Spectrum Monitoring, Transmitter Test, RF Component Characterization and EMI applications. If you are integrating hopping/channel shifting technologies in crowded ISM bands, integrating PLL technology in your designs, trying to identify sources of interference or trying to characterize rapidly pulsing applications- you will certainly benefit from the seamless capture capabilities of the real-time spectrum analysis capability and the 7.45us 100% POI!
- 9 kHz to 3.2 GHz
- Ultra-Real technology
- Frequency: up to 6.5 GHz
- Displayed average noise level (DANL):
- Phase noise:
- Level measurement uncertainty:
- Min. RBW 1 Hz
- EMC filter and quasi-peak detector
- Various measurement functions
- Multiple measurement modes
- Up to 40 MHz real-time analysis bandwidth
- Multiple trigger modes and trigger masks
- Density, Spectrogram, and other display modes
- PC software options
- 10.1" capacitive multi-touch screen, supporting touch gestures
- USB, LAN, HDMI and other communication and display interfaces
| Try Before You Buy | |
| Save Time & Money | |
| Weekly and Monthly Rentals | |
| Access Our Large Inventory | |
| Long-term Discounts and Rent-to-Buy Options Available |
| Product Feature | Customer Benefit |
|---|---|
DANL as low as -165 dBm with optional preamp |
View lower powered signals (harmonics, interference sources) and ease trouble-shooting in swept and real-time mode. Using the optional PreAmplifier the RSA5000 enables engineers to accurately view signals down to a noise floor of -165 dBm. In addition to locating and isolating lower power signals across the spectrum, this makes it possible to more precisely characterize all of the critical RF components within the transceiver design including attenuators, filters, mixers, and antennas. |
1 Hz Minimum Resolution Bandwidth (RBW)  |
Provides high resolution to separate signals with close frequencies enabling easier signal identification for characterization and advanced measurements. Analyzing signals that are close together in frequency is critical to validation of many RF devices and systems. With the RSA5000, sweep a signal bandwidth with a RBW setting of just 1 Hz to view additional detail on close signals |
1 ms full span sweep  |
Utilize the fast 1 millisecond full span sweep to quickly identify signals of interest. Quickly evaluating a broad spectrum for signals of interest and possible signs of interference or unwanted transmissions can be time consuming as many of these signals are moving to shorter and shorter durations. The RSA5000 makes a full span sweep in just 1 ms making it possible to capture many of these signals on the first pass and quickly get a more comprehensive understanding of the local transmissions before moving to real-time for additional analysis. |
>Up to 40 MHz of Real-Time BW  |
View wider band and hopping signals at one time without additional setup making identifying and analyzing signals of interest faster and easier. Engineers debugging time is a critical resource in any new design process. RF debugging is already a complicated challenge. Expanding the Real-Time bandwidth of the RSA5000 Series Analyzer to 40 MHz with the RSA5000-BW40 option makes it faster and easier to capture, isolate, and debug wider bandwidth signals with a single setup. |
7.45 µs 100% POI  |
Capture pulsed transmissions as short as 7.45 µs with guaranteed capture and power accuracy. Probability of Intercept is an important specification for any serious Real-Time Spectrum Analyzer. It is the only way to know if your power measurements are accurate given a signal |