Gedore Tools 8471-01

Product Highlights

• Classified to DIN EN ISO 6789:2003 Type II Class A, with a factory certificate. Working accuracy: +/- 3 % tolerance of scale set torque. The specification of the standard (+/- 4 %) is exceeded.
• Lightweight yet robust (as the housing is made of an aluminium alloy) and resilient, very workshop-friendly
• Depending on the application, access is possible from the front (e.g. open-end fitting) or side (e.g. reversible ratchet and socket)
• Force to be applied in the middle of the handgrip only - do not use an extension tube as otherwise, inaccuracies can evolve (except for model DXZ where the DREMOMETER has been calibrated and adjusted using the extension tube)
• Operation only with end fittings with standardised depth gauges, otherwise inaccuracies can arise. Keep the depth gauges on the certificate i Nmind. Only use original GEDORE accessories.
• Large drive cross-section transfers maximum torques
• Extremely low wear attributable to reduced forces in the lever mechanism
• Forged lever chain from our own quality forge
• Maximum precision even when subjected to extreme continuous use
• Long life cycles and tool lives
• Easy operation - fast and safe torque tightening
• Easy adjustment thanks to attractive adjusting button secured against loss at the end of the handle
• With certificate acc. to DIN EN ISO 6789, traceable via in-house DAkkS laboratory to national standards
• Drive Type: DXZ
• Drive connector pin: 28
• Range of work/measurement Nm (min/max): 520-1000
• Range of work/measurement lbf ft (min/max): 380-730
• Scale divisions: 10 Nm / 10 lbf ft
• Distance middle of handgrip to pivot point: 1.221,0
• Depth gauge (C,L): 75
• Width: 45
• Distance middle of screw to pivot point: 57
• Distance housing-drive: 17,5
• Length (L,L1): 1319
• Weight: 5,500
• Packing Unit (PU): 1
• Target group: Industry, Renewable Energies, Wind power