Fluke Calibration 5627A-6-J RTD Industrial Probe, 6" x 3/16"

Product Highlights

• Vibration and shock resistant
• 3/4-inch bend radius for increased durability
• NIST-traceable calibration included
• Resistance: Nominal 100 ohms at 0°C
• Temperature Coefficient: 0.00385 ohms/ohm/°C nominal
• Temperature Range: -200°C to 500°C (transition and cable temperature 150°C maximum)
• Resistance Stability: ±0.13°C at 0°C after 1000 hours at 400°C
• Sheath Material: 316 Stainless Steel
• Leads: Teflon™-insulated, nickel-plated stranded copper, 22 AWG
• Termination: Four gold-plated spade lugs are standard. Specify 1502 connector if needed. Other options available.
• Hysteresis: 0.04% maximum between -200°C and 500°C
• Time Constant: Four seconds maximum for 63.2% response to step change in water moving at 3 fps.
• Bending Radius: Sheath is bendable on a minimum radius of 3/4 inch except for 2-inch sensitive area of sheath near tip.
• Calibration: Includes NIST-traceable table with R vs. T values in 1°C increments from -183°C to 500°C. ITS-90 coefficients included

Webinars

Automating and Documenting Temperature Calibration Webinar with Fluke Calibration

Differential Pressure Meter Gas Custody Transfer Calibration Webinar with Fluke