Fluke 3540 FC KIT 3-Phase Power Monitor and condition monitoring

3-Phase Power Monitor and condition monitoring

Order #: 3540-FC-KIT

Mfg #: 4948724

new

Skip to the end of the images gallery

Skip to the beginning of the images gallery

$6,028.39

Not Available for sale in Canada.

Availability:

In stock

Choose Your Options:

Add Calibration

Qty

This product is available for shipping to the United States, Canada, and Puerto Rico only.

Product Overview

Product Highlights

The 3540 FC Three-Phase Power Monitor is a compact device to monitor key electrical parameters at three-phase machinery (or equipment) and stream data to the Fluke Connect® Cloud. The measurement data is available on any connected device using Fluke Connect mobile app or Fluke Connect® Condition Monitoring software.

Graphs are available to show the trends and fluctuations of the measurements during the monitoring period. Alarm settings notify users immediately when measurement values are outside specified thresholds.

Monitoring the electrical parameters like current and distortion can reveal how the machinery (or equipment) is performing, for example:

A baseline current or load at a critical pump is trending dangerously close to the motor’s maximum current rating, taking service factor into account.
The total power at an induction furnace appears to be fluctuating abnormally during a curing cycle.
Determining how often a submersible or hydraulic pump is cycling on/off to maintain flow or pressures, in some cases simply validates their is power to the pump.

Measures single or three phase loads; voltage, current and frequency; power including active power, non-active power, and power factor; and total harmonic distortion
Remote access to measurements via the Fluke Connect Condition Monitoring software
Graphs show trends and fluctuations of the measurements during the monitoring period; and alarm settings notify users when measurement values are outside user-set thresholds
3540 FC Three-Phase Power Monitor is portable, wireless, battery powered, and easy to install

The Monitor includes a mode to log measurements when no connection to the Fluke Connect® Cloud is available. You can transfer Logged data with the Fluke Connect mobile app.

The total number of measurements depends on the selected topology (wiring configurations), like wye, delta, or split phase.

Each Unit Includes

power supply
voltage test leads
dolphin clips (4x)
1500A flexible current probe (3x)
magnetic hanging kit
WiFi to USB adapter
color coding set

Specifications

General specifications
Color LCD display	4.3-inch active matrix color TFT, 480 pixels x 272 pixels, resistive touch panel
Warranty	3540 FC and built-in power supply	2 years (battery not included)
	Accessories	1 year
Calibration cycle	2 years
Dimensions (wxhxd)	3540 FC	19.8 cm x 16.7 cm x 5.5 cm (7.8 in x 6.6 in x 2.2 in)
	Detachable power supply	13.0 cm x 13.0 cm x 4.5 cm (5.1 in x 5.1 in x 1.8 in)
	3540 FC with power supply attached	19.8 cm x 16.7 cm x 9 cm (7.8 in x 6.6 in x 4.0 in)
Weight	3540 FC	1.1kg (2.5 lb)
	Power Supply
Tamper protection	Kensington lock

Environmental specifications
Operating temperature	O °C to 45 °C (32 °F to 113 °F)
Storage temperature	<20 °C to +60 °C (-4 °C to +140 °F), with battery: -20 °C to +50 °C (-4 °F to +122 °F)
Operating humidity	<10 °C (<50 °F) non condensing
	10 °C to 30 °C (50 °F to 86 °F) ≤95 %
	30 °C to 40 °C (86 °F to 104 °F) ≤75 %
	40 °C to 45 °C (104 °F to 113 °F) ≤45 %
Operating altitude	2000 m (6,500 ft) (up to 4,000 m derate to 1000 V CAT II/600 V CAT III/300 V CAT IV)
Storage altitude	12,000 m (39,000 ft)
IP rating	IEC 60529:IP50, in connected condition with protection caps in place
Vibration	MIL-T-28800E, Type 3, Class III, Style B
Safety
IEC 61010-1	IEC mains input	Overvoltage Category II, Pollution Degree 2
	Voltage terminals	Overvoltage Category IV, Pollution Degree 2
Electromagnetic compatibility (EMC)
International	IEC 61326-1: Industrial
Korea (KCC)	Class A Equipment (Industrial Broadcasting & Communication Equipment)
USA (FCC)	47 CFR 15 subpart B. This product is considered an exempt device per clause 15.103.
Wireless radio with adapter
Frequency range	2412 MHz to 2462 MHz
Output power	<100 mW

Electrical specifications
Single and Three Phase Topologies
Wiring configurations	1-Φ, 1-Φ IT, Split phase, 3-Φ wye, 3-Φ wye IT, 3-Φ wye balanced, 3-Φ delta, 3-Φ Aron/Blondel (2-element delta), 3-Φ delta open leg, 3-Φ high leg delta, 3-Φ delta balanced. Currents only (load studies)
Voltage inputs
Number of inputs	4 (3 phases and neutral)
Maximum input voltage	1000 Vrms (1700 Vpk) phase to neutral
Input impedence	10 MΩ each phase to neutral
Bandwidth	42.5 Hz to 3.5 kHz
Scaling	1:1, variable
Current inputs
Number of inputs	3, mode selected automatically for attached sensor
Current sensor output voltage	Clamp	500 mVrms / 50 mVrms; CF 2.8
	Rogowski coil	150 mVrms/15 mVrms at 50 Hz, 180 mVrms/18 mVrms at 60 Hz; CF 4; all at nominal probe range
Bandwidth (-3 dB)	42.5 Hz to 3.5 kHz
Scaling	1:1 and variable
Data acquisition
Resolution	16-bit synchronous sampling
Sampling frequency	10.24 kHz at 50/60Hz, synchronized to mains frequency
Input signal frequency	Mains 50/60 Hz (42.5 to 69 Hz)
Data storage	Internal flash memory (not user replaceable)
Memory size	Typical 1 offline logging session of 1 week with 1 second intervals. The number of possible logging sessions and logging period depends on user requirements.
Measured parameters	Voltage, current, frequency, THD V, THD A, power, power factor, fundamental power, DPF
Averaging interval	1 s
Total harmonic distortion	THD for voltage and current is calculated on 25 harmonics
Calculated min/max values times
Voltage	Full cycle RMS (20 ms at 50 Hz, 16.7 ms at 60 HZ)
Current	Half cycle RMS (10 ms at 50 Hz, 8.3 ms at 60 Hz)
Power	200 ms
Interfaces
USB-A	Firmware updates, max. supply current: 120 mA
WiFi
Supported modes	Direct connection and connection to infrastructure
Security	WPA2-AES with pre-shared key
Power supply
Voltage range	nominal 100 V to 500 V (85 V min to 550 V max) using safety plug input
Mains power	nominal 100 V to 240 V (85 V min to 265 V max) using IEC 60320 C7 input
Power consumption	Maximum 50 VA (max. 15 VA when powered using IEC 60320 input)
Standby power	<0.3 W only when powered using IEC 60320 input
Efficiency	≥ 68.2 % (in accordance with energy efficiency regulations)
Mains frequency	50/60 Hz ± 15 %
Battery power	Li-ion 3.7 V, 9.25 Wh, customer-replaceable
On-battery runtime	Up to 4 hr (up to 5.5 hr in energy saving mode)
Charging time	<6 hr

Technical Resources

Related Products

RIGOL DS70504

5GHz Oscilloscope w/20 Gsa/sec sampling and 15.6" Display

As low as $52,498.50

Used Tektronix MSO64 6-BW-8000 6 Series MSO Oscilloscope, 8GHz, 4 FlexChannels

6 Series MSO Oscilloscope,8GHz 4 FlexChannels

As low as $74,998.50

Fluke 378 FC 1000A AC/DC Non-Contact Voltage True-rms Clamp Meter with iFlex

1000A AC/DC Trms Noncontact Vol Wireless Clamp,Pq Ind,Iflex

As low as $1,061.15

Mid-West Instrument 845-5

BackFlow Test Kit, 0-15 PSID 500 PSIG Max Working Pressure

As low as $1,417.50

Pepperl+Fuchs HM-PF-USB-010031

Viator USB HART Interface

As low as $993.53

Fluke 902 FC TRMS Wireless HVAC Clamp 2x test leads

TRMS Wireless HVAC Clamp 2x test leads

As low as $444.99

Fluke 87-5 Industrial True RMS Multimeter with Temperature

Industrial True RMS Multimeter with Temperature

As low as $604.74

Emerson AMS TREX Communicator

As low as $8,092.50

Siglent SDG6052X

500 MHz Waveform Generator,2 ch 2.4 GSa/s, 16-bit

As low as $8,235.00

Siglent SDM3045X

4.5 Digital Multimeter

As low as $598.50