Overview of Calibration Disciplines

Companies with the most stringent quality requirements trust Transcat to meet their calibration needs. Transcat provides calibrations for a broad array of disciplines and instruments, allowing you to fulfill your calibration needs from a single, reliable vendor:

Reference Level

• Humidity Laboratory Standards from Chart Recorders and Transmitters (1% RH or Better) to Chambers
• Dimensional Laboratory Standards from End Measuring Rods and Gage Blocks to Ring Gages and Master Setting Plugs
• Temperature Laboratory Standards (Accuracy <=0.1°C) such as SPRT by Fixed Point and/or Comparison
• Mass, Weight, Force, and Torque Laboratory Standards such as Weights and Weight Sets, Class 1, 2, or 3
• Electrical DC/AC-LF Laboratory Standards from High Voltage Dividers and High Voltage Meters to Multifunction Calibrators and Multimeters (>=7.5 digits)
• Pressure and Vacuum Laboratory Standards from Pressure Devices and Pressure Calibrators to Deadweight Testers

Dimensional

• Length Measurement Instruments from Micrometers and Calipers to Tape Measures and Height Gages
• Optics-based Instruments from Glass Scales to Optical Comparators
• Geometric Dimensioning & Tolerancing (GD&T) such as Overlays to Custom Gaging

Electrical

• DC/AC-LF (DC to 100 MHz) Instruments from Multimeters and Power Supplies to Signal Generators and Oscilloscopes
• HF/UHF (>100 MHz to 1.3 GHz) Instruments from Scopemeters and Oscilloscopes to Time Domain Reflectometers
• RF/Microwave (>1.3 GHz to 26.5 GHz) Instruments from Power Meters and Oscilloscopes to Time Domain Reflectometers and Spectrum Analyzers
• Luminance/Illuminance (400nm to 800nm) Instruments such as Luxmeters and Lightmeters
• VXI/VMEbus and PXI/PCIbus Architecture Instruments such as National Instrument Cards

Life Science

• Pharmaceutical Industry Instruments from Centrifuges and Autoclaves to Cryogenic Freezers and Sieves
• Food Industry Instruments from Polarimeters to Refractometers
• Chemical/Biological Instruments such as Glassware, pH Meters and Conductivity Meters
• Biomedical Industry Instruments from Pacemaker Analyzers and Cardiac Output Simulators to Non-Invasive Blood Pressure Simulators (NiBP)

Physical

• Pressure and Vacuum Instruments from Pressure Gauges and Manometers to Barometers and Pressure Calibrators
• Temperature Instruments (Secondary Level/Industrial: > 0.1°C) from Liquid-in-Glass Thermometers and Thermocouples to Temperature Indicators and Dry Block Calibrators
• Velocity (Speed) and RPM (Rotational Speed) Instruments from Tachometers and Tuning Forks to Radar Guns and Radar Detectors
• Rotational Force i.e., Torque Instruments from Torque Wrenches and Torque Screwdrivers to Torque Testers and Torque Analyzers
• Humidity Instruments from Chart Recorders and Humidity Meters to Thermo-Hygrometers and Humidity/Temperature Transmitters
• Mass and Weighing Instruments from Weights and Weight Sets Class 1-3 and 4, 5, 6, 7 to Scales and Balances
• Force and Hardness Instruments from Dynamometers and Crimp Tools to Force Gauges and Load Cells
• Infrared Thermometers such as -20° to 1,000°C Infrared Thermometers and Pyrometers
• Particle Counters from Sizes 0.3, 0.5, 0.7, 1, 2, 3, 5 Microns Particle Counters to Environmental Meters
• Vibration, Acceleration, and Seismography Instruments from Accelerometers and Vibration Meters to Vibration Calibrators and Wobulators
• Flow Meters such as 0 to 100 slpm of Air Only Flow Meter, 0 to 100 slpm
• Air Velocity, Flow, and Leak Rate Instruments such as Flow Meters and Air Velocity Meters
• Gas Analysis Instruments from Oxygen Meters to Combustible/Toxic Meters
• Environmental Instruments/Devices from Particle Counters to Environmental Meters