CAN - en 
US
Tektronix THDPO100 for Rent, Differential High Voltage Probe, 100 MHz
Differential High Voltage Probe 100 MHz
Order #: THDPO100-RENT2
Mfg #: THDPO100
Call for price
Call for price
Tektronix THDPO100 for Rent, Differential High Voltage Probe, 100 MHz
Differential High Voltage Probe 100 MHz
Order #: THDPO100-RENT2
Mfg #: THDPO100
A high voltage differential probe is used for measuring the voltage difference between two test points where neither test point is at the ground. High voltage differential probes from Tektronix can be used for signals up to 6000 V. These probes are the best choice for making non-ground referenced, floating or isolated measurements in large part due to their common-mode rejection capability. These products are designed, manufactured, and serviced by Tektronix.
Features
- Attenuation: 100X / 1000X
- Bandwidth: 100 MHz
- Input Impedance: 40 MΩ || 2.5 pF
- Maximum Voltage
- 1000X: ± 6000 V
- 100X: ± 600 V
- Selectable Bandwidth-limiting Filters
- DC Reject
- Small Compact Probe Head for Probing Small Geometry Circuit Elements
- Straight Pin, Square Pin, Solder Down, Variable Pitch Standard Accessories
- Robust Design for Reliability
- Provides Automatic Units Scaling and Readout on the Oscilloscope
| Bandwidth (Probe only) | 100 MHz |
| Attenuation | 100X / 1000X |
| Rise Time (Probe only) | <700 ps |
| Differential Input Capacitance | 2.5 pF |
| Differential Input Resistance | 40 MΩ |
| CMRR | >55 dB at 30 kHz >50 dB at 1 MHz >18 dB at 250 MHz (warranted at 50x attenuation) |
| Sensitivity/Noise Level | 2 mV RMS (5x attenuation) 1 mV RMS (50x attenuation) referred to the probe output 10 mV RMS (5x attenuation) 50 mV RMS (50x attenuation) referred to the probe input |
| Differential Mode Input Voltage | ±42 V (DC + pk AC); 30 V RMS |
| Common Mode Input Voltage | ±35 V (DC + pk AC); 25 V RMS |
| Input Offset Range | ±42 V (5x or 50x attenuation) |
| Max Input Voltage (Nondestruct) | ±100 V (DC + pk AC) |
| Selectable Bandwidth Filter Limits | 100 Hz, 10 kHz, 1 MHz, Full |
| DC Reject | 0.4 Hz (5x) 4 Hz (50x) |
| Gain Accuracy at DC | ±2% |
| Propagation Delay | 6.5 ns |
| Scope Interface | TekVPI™ Probe Interface |