Shimpo FP-005

Product Highlights

Keep Indoor Air Clean: Maintain a healthy environment. Heavily loaded filters can force dirty, unfiltered air to be pushed around the filter and into the environment without being properly cleaned by the filter! This is particularly an issue for the young, elderly or those with breathing impairments. Indoor air can be far dirtier than outdoor air. Don't make the problem even worse by not changing your filter at the proper time.

Change Filter When System Demands

No Longer Replace Filter Before Required: In many locations, during spring and fall the HVAC system runs far less versus winter and summer. If you use the same replacement schedule all year, you actually may be paying more for filters by replacing them before they are sufficiently loaded.

Lengthen Lifetime of HVAC System

Less downtime; Reduce Replacement Costs: For every additional hour of run time from an overloaded filter, the HVAC unit's lifetime is reduced by approximately 1 hour!

Eliminate Maintenance Checks

Reduce Maintenance Costs: In many large buildings, apartments, schools or industrial complexes, there can be hundreds of filters to inspect. Maintenance personnel rely on a schedule to routinely check the filters to make a judgment if replacement is necessary. Significant time is wasted on these routine checks. With the FilterPulse™, this cycle can be eliminated as the sensor signals the exact point when the filter is to be changed.

Energy Savings

Lower Electric Bills: The heavier the workload from a dirty filter, the harder the HVAC system has to operate. The harder the HVAC system works, the more energy demanded to perform the same level of performance. This higher level of energy of course corresponds to an increased energy bill.

Each Unit Includes

• A sensor bracket with connection cable
• Control Box
• 9 Volt Battery in battery-powered models