Ralston Instruments DPPV-KIT6-GC DPPV Pressure/vacuum pump, +/-15psi LC20, 3' hose, Adapter

Product Highlights

DPPV pressure/vacuum pump, +/-15 psi/100 kPa LC20 gauge, 3ft hose, 1/4" MNPT adapter

Create pressure or vacuum and calibrate instrumentation using a pressure gauge or calibrator attached to the pump (gauge or calibrator not included)

• Hand Pump: DPPV Pneumatic Pressure / Vacuum Hand Pump
• Pressure Reference: LC20 pressure gauge, +/- 15 psi / 100 kPa, 1/4" Male NPT bottom connection
• Reference Connection: 1/4" female NPT x female Quick-test, no check-valve, brass
• Process Connection: 1/4" male NPT x male Quick-test, no check-valve, brass
• Hose: Quick-test 6900 psi hose, brass hose ends, 3 ft (92 cm) long
• Pressure Reference: None
• Process Connection: 1/4" Male NPT
• Reference Connection: 1/4" Female NPT
• Country of origin: USA
• Max Pressure: 125 PSI / 8.6 bar / 860 kPa
• Max Vacuum: -23 InHg / -77.9 kPa
• Materials: Anodized Aluminum, Brass, Stainless Steel
• Seal Materials: Buna-N, Teflon
• Min Operating Temperature: 0 °F / -18 °C
• Max Operating Temperature: 130 °F / 54 °C
• Hand Pump DPPV
  • Piston Displacement: 1.25 Cu In
  • Max Pressure: 125 PSI / 8.6 bar / 860 kPa
  • Max Vacuum: -23 InHg / -77.9 kPa
  • Min Operating Temperature: 0 °F / -18 °C
  • Max Operating Temperature: 130 °F / 54 °C
  • Pressure Media: Air
  • Burst Pressure: 1000 PSI / 70 bar / 7.00 MPa
  • Harmonized Code: 8414.10.0000
  • Materials: Anodized Aluminum, Brass, Stainless Steel
  • Media Compatibility: Air, Inert Gas, Natural Gas
  • Outlet Port: Male Quick-test, Male Quick-test with cap and chain
  • Seal Materials: Buna-N, Delrin
  • Country of origin: USA
  • Fine Adjustment Resolution: 0.01 psi / 70 Pa
• Pressure Reference LC20-GC2M-00-00
  • Battery Count: 2
  • Battery Life: 1000 Hours
  • Battery Type: AA Alkaline (IEC-LR6)
  • Bluetooth Radio Installed: No
  • Calibration Certificate: ISO 17025:2017 Accredited
  • Certifications: Certified to CSA Standard C22.2 No. 61010-1, Complies with Pressure Equipment Directive 2014/68/EU, Complies with Low Voltage Directive 2014/35/EU, Complies with Electromagnetic Compatibility Directive 2014/30/EU
  • Country of origin: USA
  • Datalogging: PC based (via USB)
  • Electrical Rating: 50 mA @ 5 VDC
  • Harmonized Code: 9026.20.0000
  • Ingress Protection: IP67 (1 meter water submersion for 30 minutes)
  • LCD Display: 2.4 in / 61 mm segmented LCD Display
  • Materials: ABS / Polycarbonate Blend, Powder Coated Aluminum
  • Max Operating Temperature: 122 °F / 50 °C
  • Min Operating Temperature: -4 °F / -20 °C
  • Panel Mount: No
  • Primary Power: Battery Power
  • Process Connection: 1/4" Male NPT (ASME B1.20.1)
  • Process Connection Location: Bottom mount
  • Protection Class: Pollution Degree 2 (UL / IEC 61010-1)
  • Temperature Compensation: None
  • USB Connection: USB (Micro B)
  • W1 Radio Installed: No
  • Wetted Materials: 316 Stainless Steel
  • Wireless: None
  • End 1 Connector: 1/4" Male NPT (ASME B1.20.1)
  • End 1 Direction: Left
• Sensor A Bottom
  • Max Vacuum: 30 InHg / 101.6 kPa
  • Measurement Type: Gauge Pressure, Gauge Vacuum
  • Accuracy - Pressure Measurement: +/- 0.1% of Full Scale (ASME B40.100 Grade 4A/ISO Class 0.1)
  • Media Compatibility: Air, Alcohol, Antifreeze, Ethylene Glycol, Hydraulic Oil, Inert Gas, Light motor oil, Mineral Oil, Natural Gas, Petroleum Based Oil, Ralston Calibration Oil, Skydrol, Transmission fluid, Water, Windshield washer fluid, Oxygen (If Oxygen cleaned)
  • Engineering Units: atm, bar, cmH2O @4°C, inH2O @39°C, kPa, mbar, psi, inHg @39°F, kgf / cm^2, mmHg @0°C, Torr, mmH2O @4°C, ftH2O @39°F, cmHg @ 0°C, oz / in^2
  • Wrench Size: 7/8 In / 23 mm
  • Wrench Size: 23 mm / 7/8 in
  • Sensor Type: Pressure Sensor
  • Max Storage Temperature: 167 °F / 75 °C
  • Min Storage Temperature: -40 °F / -40 °C
  • Country of origin: USA
  • Max Pressure: 15 PSI / 1 bar / 100 kPa
  • Wetted Materials: 316 Stainless Steel
  • Max Operating Temperature: 122 °F / 50 °C
  • Min Operating Temperature: -4 °F / -20 °C
  • Process Connection: 1/4" Male NPT
• Reference Connection: QTHA-2FBA
  • Country of origin: USA
  • Materials: Brass
  • Max Operating Temperature: 225 °F / 105 °C
  • Max Pressure: 5000 PSI / 350 bar / 35 MPa
  • Max Vacuum: 0 InHg / 0.0 kPa
  • Wrench Size: 3/4 In / 20 mm
  • Wrench Size: 19 mm / 23/32 in
  • End 1 Connector: 1/4" Female NPT (ASME B1.20.1)
  • End 1 Direction: Left
  • End 2 Connector: Female Quick-test
  • End 2 Direction: Left
• Process Connection QTHA-2MB0
  • Burst Pressure: 20000 PSI / 1380 bar / 140 MPa
  • Country of origin: USA
  • Materials: Brass
  • Max Operating Temperature: 225 °F / 105 °C
  • Max Pressure: 5000 PSI / 350 bar / 35 MPa
  • Max Vacuum: 0 InHg / 0.0 kPa
  • Min Operating Temperature: 0 °F / -18 °C
  • Seal Materials: Buna-N
  • Wrench Size: 9/16 In / 15 mm
  • Wrench Size: 15 mm / 9/16 in
  • End 1 Connector: 1/4" Male NPT (ASME B1.20.1)
  • End 1 Direction: Left
  • End 2 Connector: Male Quick-test
  • End 2 Direction: Left
• Hose QTQT-HOS-3ft
  • Burst Pressure: 27000 PSI / 1860 bar / 185 MPa
  • Color: Silver
  • Country of origin: USA
  • Fluid Media: Air,Inert Gas,Natural Gas,Petroleum Based Oil,Water
  • Hose Length: 3ft / 0.91 m
  • Inner Diameter: 0.08 In / 3.00 mm
  • Length: 3 ft / 92 cm
  • Materials: Brass
  • Max Operating Temperature: 140 °F / 60 °C
  • Max Pressure: 6900 PSI / 475 bar / 48 MPa
  • Max Vacuum: -30 InHg / -101.6 kPa
  • Media Compatibility: Air, Inert Gas, Natural Gas, Petroleum Based Oil, Water
  • Min Operating Temperature: -40 °F / -40 °C
  • Minimum Bend Radius: 1 In / 26 mm
  • Outer Diameter: 0.2 In / 6.00 mm
  • Type: QT
  • Hose End 1: Female Quick-test, brass
  • Hose End 2: Female Quick-test, brass

Each Unit Includes

• LC20 pressure gauge, +/- 15 psi / 100 kPa, 1/4" Male NPT bottom connection LC20-GC2M-00-00
• 1/4" female NPT x female Quick-test, no check-valve, brass QTHA-2FBA
• 1/4" male NPT x male Quick-test, no check-valve, brass QTHA-2MB0
• Quick-test 6900 psi hose, brass hose ends, 3 ft (92 cm) long QTQT-HOS-3ft
• USB-A to Micro USB-B cable, 2m long D-000040
• ISO 17025:2017 Accredited Calibration certificate for Field Gauge models LC10, LC20, LC30 SERV-0026