Norbar Torque Tools ET2-119-7000-230

Product Highlights

• Accuracy: ±3%
• Operates between: 700.0 - 7000.0 N·m/1030.0 - 5200.0 lbf·ft
• 1 1/2" Square Drive
• 3.3 rpm
• Tool Weight of 16.8kg
• Calibrated to 20% - 100% of tool's maximum capacity
• Operational targets can be set from 10% of tool capacity
• 'Usage' counter gives the ability to see the amount of times the tool has been used since the last reset
• "Operation Direction" designed primarily for undoing bolts. When doing sequence tightening, it is now possible to undo an incorrectly tightened bolt without interrupting the sequence
• 2 Stage Tightening gives faster application of a Snug Torque & Angle Target
• "Turn Angle" option can be used to check if bolts have already been tightened in an assembly process
• Allows tool integration into third party control systems
• Maximum Audit Mode target angle increased to 720 degrees
• Ability to produce and store real time graphs via EvoLog
• 2 different lock levels, lock level 1 as per previous lock, lock level 2 will not allow user to exit the run screen or change the target
• Torque, Torque & Angle, Torque & Angle with Final Torque or Torque Audit Modes
• Each tool is supplied with a traceable calibration certificate