Order #: 2253IX-RENT2
Mfg #: 2253IX-RENT2
Rent the Ametek 2253IX AC Power Source, 47-63Hz, 115V-230V, RMS 3-Phase
Order #: 2253IX-RENT2
Mfg #: 2253IX-RENT2
Request a Rental Quote
Have a Question? Speak to a Transcat Rental Expert: 800.264.4059
Product Highlights
The Compact iX Series represents a new generation of AC/DC power sources that address the increasing demands on test equipment to perform additional functions at a lower cost. By combining a flexible AC/DC power source with a high performance power analyzer, the Compact iX Series is capable of handling complex applications that have traditionally required multiple systems.
The sleek integrated approach of the Compact iX Series avoids cable clutter that is commonly found in test systems. All connections are made internally and the need for digital multimeters, power harmonics analyzers, and current shunts or clamps is eliminated.
Since many components in the Compact iX Series are shared between the AC/DC source and the power analyzer, the total cost of the integrated system is less than the typical cost of a multiple unit system.
For less demanding applications, the Compact i Series provides similar output and transient capabilities as the Compact iX Series, as well as basic power measurements.
Key Features
- 2250 VA of AC Output Power
- Combines AC/DC source and power analyzer
- Harmonic analysis of Voltage and Current
- AC, DC and AC+DC Output Modes
- Multiple Chassis Configurations
- Powerful output transient generation
- High Crest Factor Capability
- Arbitrary waveform generation
- Single and Three Phase models available
Easy To Use Local Controls
Both the Compact i/iX feature microprocessor controlled and can be operated from an easy to use front panel keypad. Functions are grouped logically and are directly accessible from the keypad. This eliminates the need to search through various levels of menus and/or soft keys. A large analog control knob can be used to quickly slew output parameters. This knob is controlled by a dynamic rate change algorithm that combines the benefits of precise control over small parameter changes with quick sweeps through the entire range.
Applications
With precise output regulation and accuracy, the Compact i/iX sources address many application areas for AC and DC power testing. The iX also provides a high load current capability, multi or single phase output modes, and built-in power analyzer measurements. Additional features including line distortion simulation (LDS) and arbitrary waveform generation
Product Evaluation and Test
Increasingly, manufacturers of electronic equipment and appliances are required to fully evaluate and test their products over a wide range of input line conditions. The built-in output transient generation and readback measurement capability offers the convenience of an easy to use and integrated test system.
Avionics
With an output frequency range to 1000 Hz, at up to 150 VRMS, the Compact i/iX is well suited for aerospace applications. Precise frequency control and accurate load regulation are key requirements in these applications. The standard IEEE-488 control interface and SCPI command language provide for easy integration into existing ATE systems. Since the iX Series II can eliminate the need for several additional pieces of test equipment and only occupies 7 inches of rack space (4U), saving both cost and space. Instrument drivers for popular programming environments such as National Instruments LabView, DO-160, ABD-0100, MIL-STD-704A-F, and Boeing 7E73B-0147 are available to speed up system integration.
Remote Control
Available RS232, USB, GPIB and LXI Compliant Ethernet (LAN) remote control interfaces allow programming of all instrument functions from an external computer. The popular SCPI command protocol is used for programming. Drivers for several popular instrumentation programming environments are available to facilitate systems integration of the Compact i/iX Series.
Instrument Control Software
Windows® Instrument Control Software is provided with the Compact i/iX. This software provides easy access to the power sources capabilities without the need to develop any custom code. The following functions are available through this GUI program:
- Steady state output control (all parameters)
- Create, run, save, reload and print transient programs
- Generate and save harmonic waveforms [iX only]
- Generate and save arbitrary waveforms [iX only]
- Measure & log standard measurements
- Capture & display output voltage & current waveforms [iX only]
- Measure, display, print & log harmonic voltage & current measurements [iX only]
- Display bus traffic to & from the AC Source to help you develop your own test programs.
- Toggle between single and three phase output.
-
Ametek - Jofra HPD60-5 for Rent, DC Power Supply, 300W, 0-60V, 0-5 ADC Power Supply 300W, 0-60V, 0-5 ACall for price
-
Ametek - Jofra P63C-30330 for Rent, High Power DC Power Supply 30VDC, 330A, 10kWHigh Power DC Power Supply 30VDC, 330A, 10kWCall for price
-
Ametek - Jofra ASC-400-BARO for Rent, Advanced Signal Calibrator with Baro ModuleAdvanced Signal Calibrator w/Baro ModuleCall for price
-
Ametek - Jofra XTS30-2 for Rent, DC Power Supply, 30V, 2A, 60W Programmable, PortableDC Power Supply 30V, 2A, 60W Programmable, Portable, ? RackCall for price
-
Ametek - Jofra SFA100X50C-1AAA for Rent, High Power DC Supplies High Slew Rate Current SourceHigh Power DC Supplies High Slew Rate Current SourceCall for price
-
Ametek - Jofra AT8000A for Rent, DC Power Supply, 10 Channel, 3000W Programmable LoadDC Power Supply, 10 Channel 3000 Watt Programmable LoadCall for price
-
Voltech DC1000 for Rent, DC Bias Current Source 0 to 25A in 10mA steps, 20Hz to 3MHzDC Bias Current Source 0 to 25A in 10mA steps, 20Hz to 3MHzCall for price
-
-
Ametek - Jofra XTS30-2X for Rent, 30V, 2A, 60W DC Power Supply Programmable, Portable30V, 2A, 60W DC Power Supply Programmable, Portable, ? RackCall for price
-
Chroma 61502 for Rent, Programmable AC Source, 300V DC, 15 to 1KHz; 1kVAProgrammable AC Source 300V DC/15 to 1KHz; 1kVACall for price
-
Ametek California Instruments CW2501P for Rent, AC Power Source, 2500VA, 1-ph 180 to 264V, 19.5AAC Power Source, 2500VA,1-ph 180 to 264V, 19.5ACall for price
-
Ametek - Jofra XTR100-8.5 for Rent, Programmable DC Power Supply, 100V, 8.5AProgrammable DC Power Supply, 100V, 8.5ACall for price
-
Ametek - Jofra DLM20-30 for Rent, DC Power Supply, 20V, 30A, 600W Programmable LoadDC Power Supply, 20V, 30A, 600W ProgrammableCall for price
-
Hioki PW3198 for Rent, Power Quality Analyzer ,V:0.1% of nominal voltagePower Quality Analyzer V:0.1% of nominal voltageCall for price
-
Ametek - Jofra PTC660C115B for Rent, Dry Block, 33C to 660CAmetek PTC660C Dry Block 33C to 660CCall for price
-
Ametek - Jofra SFA60X83C-1AAA for Rent, High Power DC Supplies High Slew Rate Current SourceHigh Power DC Supplies High Slew Rate Current SourceCall for price
-
Ametek - Jofra APM300PSI-BASIC for Rent, Advanced Pressure ModuleAmetek Advanced Pressure ModuleCall for price
-
-
Ametek - Jofra SGA160/63E for Rent, 160V, 63A, 10kW DC Power Supply, Requires 480VAC 3 Phase160V, 63A, 10kW DC Power Supply Requires 480VAC 3 PhaseCall for price
-
Ametek - Jofra RTC159B for Rent, Super Cooler Dry Block, -100C to 140CSuper Cooler Dry Block -100C to 140CCall for price
How to Rent from Transcat
1. Select Your Rental Product
- Need help selecting a unit? Try using our Product Finder or search our available units
- Can’t find what you are looking for? Is the rental unit you need, not available? Give us a call at 800-828-1470 or our chat feature to speak with one of our dedicated Rental Experts
2. Contact Our Team of Rental Experts
- Contact us here or click below to submit your request for a rental quote and a member of our Rental Team will review the request and will reach out to you very soon
3. Select Your Rental Period & Complete Your Order
- Our weekly period lasts 7 calendar days, while our monthly rental period lasts 28 calendar days
- Provide your form of payment, sign the rental agreement and any other required documents, and we will ship you the unit